Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Flat Roof Replacement cost: Janesville vs Racine (2026)

Budget-wise, flat roof replacement in Janesville ($10,050) runs 0% more than in Racine ($10,000), a roughly $50 spread.

Janesville WI

$5,150 $14,950

Typically around $10,050

Racine WI

Lower cost
$5,100 $14,850

Typically around $10,000

The $50 (0%) premium on flat roof replacement in Janesville versus Racine comes down mostly to local labor rates.
Side by side

Janesville vs Racine: full breakdown

FactorJanesvilleRacine
Typical 2026 cost$10,050$10,000
Estimated range$5,150–$14,950$5,100–$14,850
Labor index (vs US)×0.95×0.95
Climate zoneColdCold
Climate factor×1.03×1.03
Local permit$250$250
Labor share$6,050$6,000
Materials/equipment$4,000$4,000

Localized 2026 planning estimates — not quotes. Each city adjusts the national flat roof replacement range for local labor, climate and permits.

The verdict

Is the price difference a dealbreaker?

A 0% difference on flat roof replacement is minor — you'll typically see a wider spread just from getting multiple quotes in the same city, so don't let location drive the decision.

By type

Flat roof replacement by type: Janesville vs Racine

We localize each flat roof replacement type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.

TypeJanesvilleRacine
EPDM (rubber)$5,150$12,000$5,100$11,950
TPO$6,150$13,000$6,100$12,900
PVC$7,100$14,950$7,050$14,850
Modified bitumen$5,150$11,050$5,100$10,950
Built-up roofing (BUR)$6,600$14,000$6,600$13,900

All figures are 2026 localized planning estimates for flat roof replacement — get an actual quote before you commit.

By size

Flat roof replacement by roof size: Janesville vs Racine

Flat and low-slope roofs are priced per square (100 sq ft) and run about $3–$11 per sq ft installed, depending on the membrane. The roof area is close to the footprint since there's little pitch.

SizeJanesvilleRacine
1,000 sq ft (10 squares)$4,150$8,600$4,150$8,550
1,500 sq ft (15 squares)$5,150$11,050$5,100$10,950
2,000 sq ft (20 squares)$6,150$14,000$6,100$13,900
2,500 sq ft (25 squares)$7,600$15,950$7,550$15,850
3,000+ sq ft (30 squares)$9,100$18,900$9,000$18,750

Flat roof replacement numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.

Best time to buy

Cheapest time for flat roof replacement in either city

Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often earns you off-season pricing.

Best window
Late spring to early fall (dry, 45–85°F)
Avoid
Mid-winter and the post-storm rush
Off-peak savings
5–10%
Editors' roundtable

Where does a smart roofing budget go in 2026?

Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.

The risk case

Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.

The value case

For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.

The do-it-right case

Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.

Our take

A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.

FAQ

Janesville vs Racine

Is flat roof replacement cheaper in Janesville or Racine?

Racine comes out ahead here, at roughly $10,000 for flat roof replacement compared with $10,050 in Janesville — a 0% ($50) gap as of 2026.

Why does flat roof replacement cost more in Janesville than Racine?

The main driver is local labor rates: Janesville's labor index is 0.95 versus 0.95 in Racine. Climate zone (cold vs cold) also shift the total.

How much is flat roof replacement in Janesville, WI?

Janesville homeowners can expect $5,150 to $14,950 for flat roof replacement in 2026, with $10,050 the typical number.

When is the cheapest time to buy flat roof replacement — and does it differ by city?

Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Janesville and Racine, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.

Should I choose where to live based on flat roof replacement cost?

Probably not. Yes, $50 is a real gap, but it's a one-time cost you can partly offset in Janesville with off-season timing and tighter bids. Long-term factors like energy prices and home condition matter more than this one number.

Keep comparing

Compare flat roof replacement in other cities

Updated June 2026 · By Serhat Özçelik