Flat Roof Replacement cost: Brookfield vs Racine (2026)
Budget-wise, flat roof replacement in Brookfield ($11,100) runs 11% more than in Racine ($10,000), a roughly $1,100 spread.
Brookfield WI
Typically around $11,100
Racine WI
Lower costTypically around $10,000
Brookfield vs Racine: full breakdown
| Factor | Brookfield | Racine |
|---|---|---|
| Typical 2026 cost | $11,100 | $10,000 |
| Estimated range | $5,700–$16,500 | $5,100–$14,850 |
| Labor index (vs US) | ×1.05 | ×0.95 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $275 | $250 |
| Labor share | $6,650 | $6,000 |
| Materials/equipment | $4,450 | $4,000 |
These are 2026 planning figures for flat roof replacement, localized to each city — not formal quotes.
Is the gap worth worrying about?
That's a real $1,100 difference (11%) on flat roof replacement — worth factoring in, though off-season timing and a tighter quote in Brookfield can narrow it.
Flat roof replacement by type: Brookfield vs Racine
Every flat roof replacement type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Brookfield | Racine |
|---|---|---|
| EPDM (rubber) | $5,700–$13,250 | $5,100–$11,950 |
| TPO | $6,750–$14,350 | $6,100–$12,900 |
| PVC | $7,850–$16,500 | $7,050–$14,850 |
| Modified bitumen | $5,700–$12,200 | $5,100–$10,950 |
| Built-up roofing (BUR) | $7,300–$15,400 | $6,600–$13,900 |
Treat these as 2026 localized estimates for flat roof replacement, not quotes from a contractor.
Flat roof replacement by roof size: Brookfield vs Racine
Flat and low-slope roofs are priced per square (100 sq ft) and run about $3–$11 per sq ft installed, depending on the membrane. The roof area is close to the footprint since there's little pitch.
| Size | Brookfield | Racine |
|---|---|---|
| 1,000 sq ft (10 squares) | $4,600–$9,450 | $4,150–$8,550 |
| 1,500 sq ft (15 squares) | $5,700–$12,200 | $5,100–$10,950 |
| 2,000 sq ft (20 squares) | $6,750–$15,400 | $6,100–$13,900 |
| 2,500 sq ft (25 squares) | $8,400–$17,600 | $7,550–$15,850 |
| 3,000+ sq ft (30 squares) | $10,000–$20,850 | $9,000–$18,750 |
All figures are 2026 localized planning estimates for flat roof replacement — get an actual quote before you commit.
What roofing pros earn in each metro
Since labor accounts for around 60% of what a flat roof replacement job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
Milwaukee-Waukesha metro · about 8% above the US average installer wage.
No BLS metro wage series for Racine; we use Wisconsin regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for flat roof replacement in either city
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often earns you off-season pricing.
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Brookfield vs Racine
Is flat roof replacement cheaper in Brookfield or Racine?
Racine wins on price: flat roof replacement runs about $10,000 there versus $11,100 in Brookfield, a gap of roughly $1,100 (11%) as of 2026.
Why does flat roof replacement cost more in Brookfield than Racine?
The main driver is local labor rates: Brookfield's labor index is 1.05 versus 0.95 in Racine. Climate zone (cold vs cold) and permit fees also shift the total.
How much is flat roof replacement in Brookfield, WI?
Expect to pay $5,700 to $16,500 for flat roof replacement in Brookfield in 2026, averaging around $11,100.
When is the cheapest time to buy flat roof replacement — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Brookfield and Racine (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on flat roof replacement cost?
Probably not. Yes, $1,100 is a real gap, but it's a one-time cost you can partly offset in Brookfield with off-season timing and tighter bids. Long-term factors like energy prices and home condition matter more than this one number.
Compare flat roof replacement in other cities
Updated June 2026 · By Serhat Özçelik