Flat Roof Replacement cost: Bloomington vs Coon Rapids (2026)
Flat roof replacement costs about the same in Bloomington and Coon Rapids in 2026 — roughly $11,700 in each.
Bloomington MN
Typically around $11,700
Coon Rapids MN
Typically around $11,700
Bloomington vs Coon Rapids: full breakdown
| Factor | Bloomington | Coon Rapids |
|---|---|---|
| Typical 2026 cost | $11,700 | $11,700 |
| Estimated range | $6,000–$17,400 | $6,000–$17,400 |
| Labor index (vs US) | ×1.11 | ×1.11 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $300 | $300 |
| Labor share | $7,000 | $7,000 |
| Materials/equipment | $4,700 | $4,700 |
All figures are 2026 localized planning estimates for flat roof replacement — get an actual quote before you commit.
Basically a tie — focus on the contractor
Neither metro has a cost edge on flat roof replacement — spend your decision-making energy on the contractor, not the location.
Flat roof replacement by type: Bloomington vs Coon Rapids
We localize each flat roof replacement type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Bloomington | Coon Rapids |
|---|---|---|
| EPDM (rubber) | $6,000–$14,000 | $6,000–$14,000 |
| TPO | $7,150–$15,100 | $7,150–$15,100 |
| PVC | $8,300–$17,400 | $8,300–$17,400 |
| Modified bitumen | $6,000–$12,850 | $6,000–$12,850 |
| Built-up roofing (BUR) | $7,700–$16,250 | $7,700–$16,250 |
Treat these as 2026 localized estimates for flat roof replacement, not quotes from a contractor.
Flat roof replacement by roof size: Bloomington vs Coon Rapids
Flat and low-slope roofs are priced per square (100 sq ft) and run about $3–$11 per sq ft installed, depending on the membrane. The roof area is close to the footprint since there's little pitch.
| Size | Bloomington | Coon Rapids |
|---|---|---|
| 1,000 sq ft (10 squares) | $4,850–$10,000 | $4,850–$10,000 |
| 1,500 sq ft (15 squares) | $6,000–$12,850 | $6,000–$12,850 |
| 2,000 sq ft (20 squares) | $7,150–$16,250 | $7,150–$16,250 |
| 2,500 sq ft (25 squares) | $8,850–$18,550 | $8,850–$18,550 |
| 3,000+ sq ft (30 squares) | $10,550–$21,950 | $10,550–$21,950 |
These are 2026 planning figures for flat roof replacement, localized to each city — not formal quotes.
What roofing pros earn in each metro
About 60% of a flat roof replacement bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for flat roof replacement in either city
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Bloomington vs Coon Rapids
Is flat roof replacement cheaper in Bloomington or Coon Rapids?
There's no meaningful difference: flat roof replacement runs about $11,700 in both places.
Why does flat roof replacement cost more in Coon Rapids than Bloomington?
The main driver is local labor rates: Coon Rapids's labor index is 1.11 versus 1.11 in Bloomington. Climate zone (cold vs cold) also shift the total.
How much is flat roof replacement in Bloomington, MN?
Expect to pay $6,000 to $17,400 for flat roof replacement in Bloomington in 2026, averaging around $11,700.
Do roofing pros really charge more in one city?
They do, and the BLS wage data confirms it: installers earn about $36.7/hr around Minneapolis-St. Paul-Bloomington versus $36.7/hr near Minneapolis-St. Paul-Bloomington. With labor making up about 60% of a flat roof replacement job, that difference carries straight through to the final price.
When is the cheapest time to buy flat roof replacement — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Bloomington and Coon Rapids (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on flat roof replacement cost?
No — the cost is essentially identical between Bloomington and Coon Rapids. Base the decision on the things that actually vary: contractor reputation, scope, equipment tier and timing.
Compare flat roof replacement in other cities
Updated June 2026 · By Serhat Özçelik