Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Flat Roof Replacement cost: Aurora vs Belmont Cragin (2026)

There's essentially no price gap here: flat roof replacement runs close to $12,000 in both Aurora and Belmont Cragin in 2026.

Aurora IL

$6,150 $17,850

Typically around $12,000

Belmont Cragin IL

$6,150 $17,850

Typically around $12,000

Side by side

Aurora vs Belmont Cragin: full breakdown

FactorAuroraBelmont Cragin
Typical 2026 cost$12,000$12,000
Estimated range$6,150–$17,850$6,150–$17,850
Labor index (vs US)×1.14×1.14
Climate zoneColdCold
Climate factor×1.03×1.03
Local permit$300$300
Labor share$7,200$7,200
Materials/equipment$4,800$4,800

These are 2026 planning figures for flat roof replacement, localized to each city — not formal quotes.

The verdict

No real cost edge either way

With no real price gap on flat roof replacement, the choice comes down to contractor quality and timing, not which city you're in.

By type

Flat roof replacement by type: Aurora vs Belmont Cragin

Each flat roof replacement option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.

TypeAuroraBelmont Cragin
EPDM (rubber)$6,150$14,350$6,150$14,350
TPO$7,300$15,500$7,300$15,500
PVC$8,500$17,850$8,500$17,850
Modified bitumen$6,150$13,150$6,150$13,150
Built-up roofing (BUR)$7,900$16,650$7,900$16,650

Localized 2026 planning estimates — not quotes. Each city adjusts the national flat roof replacement range for local labor, climate and permits.

By size

Flat roof replacement by roof size: Aurora vs Belmont Cragin

Flat and low-slope roofs are priced per square (100 sq ft) and run about $3–$11 per sq ft installed, depending on the membrane. The roof area is close to the footprint since there's little pitch.

SizeAuroraBelmont Cragin
1,000 sq ft (10 squares)$5,000$10,250$5,000$10,250
1,500 sq ft (15 squares)$6,150$13,150$6,150$13,150
2,000 sq ft (20 squares)$7,300$16,650$7,300$16,650
2,500 sq ft (25 squares)$9,050$19,000$9,050$19,000
3,000+ sq ft (30 squares)$10,800$22,500$10,800$22,500

Flat roof replacement numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.

Local labor reality

What roofing pros earn in each metro

Labor is about 60% of a flat roof replacement bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.

Aurora, IL
$38.1/hr

Chicago-Naperville-Elgin metro · about 23% above the US average installer wage.

Belmont Cragin, IL
$38.1/hr

Chicago-Naperville-Elgin metro · about 23% above the US average installer wage.

Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).

Best time to buy

Cheapest time for flat roof replacement in either city

The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.

Best window
Late spring to early fall (dry, 45–85°F)
Avoid
Mid-winter and the post-storm rush
Off-peak savings
5–10%
Editors' roundtable

Where does a smart roofing budget go in 2026?

Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.

The value case

Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.

The risk case

Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.

The do-it-right case

Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.

Our take

The two things that actually protect a roofing budget are a real tear-off and a written rate for any deck repairs found along the way. The cheapest post-storm bid usually isn't the cheapest roof, long-term.

FAQ

Aurora vs Belmont Cragin

Is flat roof replacement cheaper in Aurora or Belmont Cragin?

There's no meaningful difference: flat roof replacement runs about $12,000 in both places.

Why does flat roof replacement cost more in Belmont Cragin than Aurora?

Labor rates explain most of it — 1.14 in Belmont Cragin vs 1.14 in Aurora. A cold climate versus cold accounts for the rest.

How much is flat roof replacement in Aurora, IL?

In Aurora, flat roof replacement typically runs $6,150–$17,850 in 2026, with most homeowners paying around $12,000.

Do roofing pros really charge more in one city?

Real wage data backs this up — skilled installers earn roughly $38.1/hr in Chicago-Naperville-Elgin compared with $38.1/hr in Chicago-Naperville-Elgin (BLS OEWS). Labor is about 60% of a flat roof replacement job, so that wage gap is what mostly drives the price difference.

When is the cheapest time to buy flat roof replacement — and does it differ by city?

Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Aurora and Belmont Cragin, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.

Should I choose where to live based on flat roof replacement cost?

Not on this basis — Aurora and Belmont Cragin cost about the same. Weigh contractor quality, scope, equipment tier and timing instead.

Keep comparing

Compare flat roof replacement in other cities

Updated June 2026 · By Serhat Özçelik