Flat Roof Replacement cost: Apple Valley vs Bloomington (2026)
Apple Valley and Bloomington are a near-perfect match on flat roof replacement cost in 2026, both landing around $11,700.
Apple Valley MN
Typically around $11,700
Bloomington MN
Typically around $11,700
Apple Valley vs Bloomington: full breakdown
| Factor | Apple Valley | Bloomington |
|---|---|---|
| Typical 2026 cost | $11,700 | $11,700 |
| Estimated range | $6,000–$17,400 | $6,000–$17,400 |
| Labor index (vs US) | ×1.11 | ×1.11 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $300 | $300 |
| Labor share | $7,000 | $7,000 |
| Materials/equipment | $4,700 | $4,700 |
These are 2026 planning figures for flat roof replacement, localized to each city — not formal quotes.
No real cost edge either way
The two metros are effectively a wash for flat roof replacement — pick on contractor quality and timing, not location.
Flat roof replacement by type: Apple Valley vs Bloomington
We localize each flat roof replacement type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Apple Valley | Bloomington |
|---|---|---|
| EPDM (rubber) | $6,000–$14,000 | $6,000–$14,000 |
| TPO | $7,150–$15,100 | $7,150–$15,100 |
| PVC | $8,300–$17,400 | $8,300–$17,400 |
| Modified bitumen | $6,000–$12,850 | $6,000–$12,850 |
| Built-up roofing (BUR) | $7,700–$16,250 | $7,700–$16,250 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national flat roof replacement range for local labor, climate and permits.
Flat roof replacement by roof size: Apple Valley vs Bloomington
Flat and low-slope roofs are priced per square (100 sq ft) and run about $3–$11 per sq ft installed, depending on the membrane. The roof area is close to the footprint since there's little pitch.
| Size | Apple Valley | Bloomington |
|---|---|---|
| 1,000 sq ft (10 squares) | $4,850–$10,000 | $4,850–$10,000 |
| 1,500 sq ft (15 squares) | $6,000–$12,850 | $6,000–$12,850 |
| 2,000 sq ft (20 squares) | $7,150–$16,250 | $7,150–$16,250 |
| 2,500 sq ft (25 squares) | $8,850–$18,550 | $8,850–$18,550 |
| 3,000+ sq ft (30 squares) | $10,550–$21,950 | $10,550–$21,950 |
Treat these as 2026 localized estimates for flat roof replacement, not quotes from a contractor.
What roofing pros earn in each metro
With labor making up about 60% of a flat roof replacement job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for flat roof replacement in either city
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Apple Valley vs Bloomington
Is flat roof replacement cheaper in Apple Valley or Bloomington?
Not really — both cities land at almost the same number for flat roof replacement, around $11,700 each.
Why does flat roof replacement cost more in Bloomington than Apple Valley?
The main driver is local labor rates: Bloomington's labor index is 1.11 versus 1.11 in Apple Valley. Climate zone (cold vs cold) also shift the total.
How much is flat roof replacement in Apple Valley, MN?
flat roof replacement in Apple Valley runs $6,000–$17,400 as of 2026 — most jobs land near $11,700.
Do roofing pros really charge more in one city?
It's not a myth — BLS data puts installer wages at about $36.7/hr in the Minneapolis-St. Paul-Bloomington area and $36.7/hr in Minneapolis-St. Paul-Bloomington. Given labor is around 60% of a flat roof replacement job's cost, that gap explains most of the price spread.
When is the cheapest time to buy flat roof replacement — and does it differ by city?
No, the seasonal pattern is the same in Apple Valley and Bloomington: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on flat roof replacement cost?
No — the cost is essentially identical between Apple Valley and Bloomington. Base the decision on the things that actually vary: contractor reputation, scope, equipment tier and timing.
Compare flat roof replacement in other cities
Updated June 2026 · By Serhat Özçelik