Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Attic Insulation cost: Logan vs Salt Lake City (2026)

Budget-wise, attic insulation in Logan ($3,900) runs 3% less than in Salt Lake City ($4,000), a roughly $100 spread.

Logan UT

Lower cost
$1,550 $6,250

Typically around $3,900

Salt Lake City UT

$1,600 $6,350

Typically around $4,000

Salt Lake City costs about $100 (3%) more than Logan for attic insulation, largely because of the local labor rate gap.
Side by side

Logan vs Salt Lake City: full breakdown

FactorLoganSalt Lake City
Typical 2026 cost$3,900$4,000
Estimated range$1,550–$6,250$1,600–$6,350
Labor index (vs US)×0.96×0.98
Climate zoneColdCold
Climate factor×1.08×1.08
Local permitNoneNone
Labor share$2,150$2,200
Materials/equipment$1,750$1,800

Localized 2026 planning estimates — not quotes. Each city adjusts the national attic insulation range for local labor, climate and permits.

The verdict

How much should this gap actually matter?

That 3% gap is small — for attic insulation it's usually less than the spread between two local contractors' quotes, so the metro matters far less than who you hire and when you buy.

By type

Attic insulation by type: Logan vs Salt Lake City

We localize each attic insulation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.

TypeLoganSalt Lake City
Fiberglass batts$1,550$4,150$1,600$4,250
Blown-in fiberglass$1,550$4,650$1,600$4,750
Blown cellulose$1,750$5,200$1,800$5,300
Spray foam$3,650$9,350$3,700$9,550

These are 2026 planning figures for attic insulation, localized to each city — not formal quotes.

By size

Attic insulation by area: Logan vs Salt Lake City

Attic insulation is priced by the square foot of attic floor, typically $1–$7 per sq ft installed depending on material and how deep you build the R-value. Blown-in is cheapest; spray foam costs the most.

SizeLoganSalt Lake City
500 sq ft$750$2,300$750$2,350
1,000 sq ft$1,250$3,650$1,250$3,700
1,500 sq ft$1,850$5,200$1,900$5,300
2,000+ sq ft$2,500$6,750$2,550$6,900

These are 2026 planning figures for attic insulation, localized to each city — not formal quotes.

Local labor reality

What insulation pros earn in each metro

Labor is about 55% of a attic insulation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.

Logan, UT
Modeled from state data

No BLS metro wage series for Logan; we use Utah regional price parity instead.

Salt Lake City, UT
$30.1/hr

Salt Lake City-Murray metro · about 3% below the US average installer wage.

Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).

Best time to buy

Cheapest time for attic insulation in either city

Demand for insulation spikes every fall as winter approaches, pushing prices with it. Spring and summer avoid that crowd, and utility rebate pools are frequently still fresh that early in the year.

Best window
Spring and summer
Avoid
The pre-winter fall rush
Off-peak savings
5–10%
Editors' roundtable

How much insulation is worth paying for?

Three choices shape an insulation budget — target R-value, whether air-sealing is included, and material type. Our editors weigh how each affects payback.

The rebate case

Insulation carries some of the strongest incentive money in remodeling, with utility and state rebates covering a real portion of the cost since the federal 25C credit expired at the end of 2025. Look up what applies on DSIRE, then schedule the work while rebate funds are still unclaimed for the year.

The R-value case

Aim for the R-value the DOE assigns your zone, not a round number that sounds close enough. Every point you fall short is comfort you don't feel and utility savings you never bank — savings that would have covered the extra material several times over.

The air-sealing case

Blown-in or batt, insulation can only slow the heat that isn't already escaping through gaps and penetrations. Sealing those leaks costs little and frequently buys more comfort per dollar than piling on extra R-value, so confirm it's written into the scope.

Our take

Payback is the whole point with insulation, and it arrives fastest when the job is done in full: air-sealing, the DOE-recommended R-value for your climate zone, and whatever utility rebates you qualify for. Trimming any one of those trims the return, not the cost.

FAQ

Logan vs Salt Lake City

Is attic insulation cheaper in Logan or Salt Lake City?

Logan wins on price: attic insulation runs about $3,900 there versus $4,000 in Salt Lake City, a gap of roughly $100 (3%) as of 2026.

Why does attic insulation cost more in Salt Lake City than Logan?

It comes down to labor: Salt Lake City indexes at 0.98 against Logan's 0.96. The cold-vs-cold climate difference adds to the gap.

How much is attic insulation in Logan, UT?

Logan homeowners can expect $1,550 to $6,250 for attic insulation in 2026, with $3,900 the typical number.

When is the cheapest time to buy attic insulation — and does it differ by city?

The best window is the same in both Logan and Salt Lake City: Spring and summer, when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during the pre-winter fall rush.

Should I choose where to live based on attic insulation cost?

That would be a stretch. $100 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Salt Lake City can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.

Keep comparing

Compare attic insulation in other cities

Updated June 2026 · By Serhat Özçelik