Attic Insulation cost: Beaverton vs Portland (2026)
There's essentially no price gap here: attic insulation runs close to $4,000 in both Beaverton and Portland in 2026.
Beaverton OR
Typically around $4,000
Portland OR
Typically around $4,000
Beaverton vs Portland: full breakdown
| Factor | Beaverton | Portland |
|---|---|---|
| Typical 2026 cost | $4,000 | $4,000 |
| Estimated range | $1,600–$6,400 | $1,600–$6,400 |
| Labor index (vs US) | ×1.07 | ×1.07 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | None | None |
| Labor share | $2,200 | $2,200 |
| Materials/equipment | $1,800 | $1,800 |
Treat these as 2026 localized estimates for attic insulation, not quotes from a contractor.
No real cost edge either way
Neither metro has a cost edge on attic insulation — spend your decision-making energy on the contractor, not the location.
Attic insulation by type: Beaverton vs Portland
Below, each attic insulation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Beaverton | Portland |
|---|---|---|
| Fiberglass batts | $1,600–$4,250 | $1,600–$4,250 |
| Blown-in fiberglass | $1,600–$4,800 | $1,600–$4,800 |
| Blown cellulose | $1,800–$5,350 | $1,800–$5,350 |
| Spray foam | $3,750–$9,600 | $3,750–$9,600 |
All figures are 2026 localized planning estimates for attic insulation — get an actual quote before you commit.
Attic insulation by area: Beaverton vs Portland
Attic insulation is priced by the square foot of attic floor, typically $1–$7 per sq ft installed depending on material and how deep you build the R-value. Blown-in is cheapest; spray foam costs the most.
| Size | Beaverton | Portland |
|---|---|---|
| 500 sq ft | $750–$2,350 | $750–$2,350 |
| 1,000 sq ft | $1,300–$3,750 | $1,300–$3,750 |
| 1,500 sq ft | $1,900–$5,350 | $1,900–$5,350 |
| 2,000+ sq ft | $2,550–$6,950 | $2,550–$6,950 |
Attic insulation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What insulation pros earn in each metro
Since labor accounts for around 55% of what a attic insulation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
Portland-Vancouver-Hillsboro metro · about 12% above the US average installer wage.
Portland-Vancouver-Hillsboro metro · about 12% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for attic insulation in either city
Everyone insulates in fall before winter, so that's the busy, full-price season. Booking in spring or summer catches off-peak pricing — and utility rebate budgets are often freshest early in the year.
How much insulation is worth paying for?
Three choices shape an insulation budget — target R-value, whether air-sealing is included, and material type. Our editors weigh how each affects payback.
The rebate case
Few home projects come with rebate support like insulation does — utility and state programs routinely offset a meaningful slice of the bill (the federal 25C credit closed in December 2025). Run your address through DSIRE first, and book when a program's yearly budget has just refilled.
The R-value case
The DOE publishes a target R-value for every climate zone, and there's a reason to reach it: stopping short shaves a little off install day but forfeits years of lower energy bills and steadier indoor temperatures. Under-insulating is the one shortcut here that never actually pays.
The air-sealing case
Insulation without air-sealing underperforms. Sealing leaks first is cheap and often delivers more comfort per dollar than thicker insulation alone — make sure it's in the scope.
What makes insulation unusual is that the thorough version and the cheap version are the same version — seal first, meet the DOE R-value for your zone, and layer on the rebates. A partial job just pushes the payback date further out.
Beaverton vs Portland
Is attic insulation cheaper in Beaverton or Portland?
Practically identical — expect around $4,000 for attic insulation whichever city you're in.
Why does attic insulation cost more in Portland than Beaverton?
Labor rates explain most of it — 1.07 in Portland vs 1.07 in Beaverton. A mixed climate versus mixed accounts for the rest.
How much is attic insulation in Beaverton, OR?
attic insulation in Beaverton runs $1,600–$6,400 as of 2026 — most jobs land near $4,000.
Do insulation pros really charge more in one city?
They do, and the BLS wage data confirms it: installers earn about $34.9/hr around Portland-Vancouver-Hillsboro versus $34.9/hr near Portland-Vancouver-Hillsboro. With labor making up about 55% of a attic insulation job, that difference carries straight through to the final price.
When is the cheapest time to buy attic insulation — and does it differ by city?
No, the seasonal pattern is the same in Beaverton and Portland: book during Spring and summer for about 5–10% in savings. The pre-winter fall rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on attic insulation cost?
Cost shouldn't be the deciding factor between Beaverton and Portland — they land at nearly the same price. Contractor reputation, scope, equipment tier and timing matter more.
Compare attic insulation in other cities
Updated June 2026 · By Serhat Özçelik